This 304 stainless steel stock sheet offers superior corrosion resistance and formability for a wide range of fabrication projects. Precisely sized for efficient material utilization and consistent results.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.131" |
| Length | 37" |
| Width | 17" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.131 inches in thickness, 37 inches in length, and 17 inches in width. Composed of 18% chromium and 8% nickel, it exhibits excellent resistance to oxidation and corrosion in various environments, making it suitable for demanding applications where hygiene and longevity are paramount. The alloy's inherent strength and ductility facilitate complex forming operations, welding, and machining without compromising structural integrity. Its non-magnetic properties further enhance its utility in specific sensitive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and free from contaminants that could compromise the stainless steel surface. 2. Carefully handle the sheet to avoid scratches or dents, utilizing appropriate lifting equipment if necessary. 3. Accurately mark and cut the sheet according to design specifications using suitable cutting tools and techniques for stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools for cutting or grinding. | Always use dedicated stainless steel tooling (e.g., carbide-tipped blades, abrasive discs) to prevent cross-contamination and galvanic corrosion. |
| Inadequate cleaning after fabrication. | Thoroughly clean all surfaces with appropriate degreasers and passivation solutions to remove fabrication residues and restore the protective oxide layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of enclosures and components, Marine hardware and structural elements, Food service equipment and sanitary applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||