This robust 304 stainless steel sheet provides superior corrosion resistance and mechanical integrity. Precisely manufactured to meet stringent safety standards, it's an ideal material for critical protective barriers and structural components in harsh environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.701" |
| Length | 29" |
| Width | 44" |
Manufactured under strict quality controls, this 304 stainless steel sheet exhibits excellent resistance to a wide range of corrosive media, making it suitable for demanding industrial applications. With a nominal thickness of 0.701 inches, a width of 29 inches, and a length of 44 inches, it offers substantial material for fabrication. The austenitic 304 grade provides good formability and weldability, with a minimum tensile strength of 515 MPa and yield strength of 205 MPa. This sheet adheres to ASTM A240 standards, ensuring consistent material properties for reliable performance in safety-critical installations.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Carefully position the sheet, aligning it with design specifications. 3. Secure the sheet using appropriate fasteners, ensuring structural integrity as per engineering drawings.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that can corrode and compromise the installation. | Always utilize fasteners made from compatible stainless steel grades (e.g., 304 or 316) to prevent galvanic corrosion and maintain long-term integrity. |
| Insufficient support leading to potential deformation or failure under load. | Provide adequate structural support at recommended intervals to ensure the sheet can withstand intended operational stresses and safety loads. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Protective barriers and guards in industrial environments, Machine enclosures and safety shielding, Corrosion-resistant structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||