This substantial 304 stainless steel stock sheet offers superior durability and corrosion resistance. Its generous dimensions and robust material make it the ideal choice for demanding material handling and fabrication tasks requiring long-term performance.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.624" |
| Length | 45" |
| Width | 18" |
Purpose-built for heavy-duty applications, this 304 stainless steel stock sheet features a substantial 0.624" thickness, providing exceptional rigidity and load-bearing capacity. Manufactured from prime 304 (UNS S30400) stainless steel, it exhibits excellent resistance to a wide range of corrosive media, including atmospheric conditions, food processing chemicals, and many organic and inorganic solutions. The nominal dimensions of 45" in length and 18" in width allow for versatile cutting and shaping in custom material handling equipment, industrial shelving, or protective barriers where sustained integrity under stress is paramount. This material's inherent strength and non-magnetic properties further enhance its suitability for diverse industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean, level, and capable of supporting the sheet's weight and any applied loads. 2. Precisely position the 304 stainless steel sheet according to design specifications. 3. Securely fasten the sheet using appropriate industrial-grade fasteners, such as bolts or rivets, spaced according to engineering calculations to prevent deformation and ensure structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Insufficient fastener spacing or undersized fasteners, leading to sheet bowing or failure under load. | Consult engineering drawings for specified fastener patterns and sizes. Use high-strength, corrosion-resistant fasteners compatible with 304 stainless steel. |
| Improper handling during transport or installation, causing scratches or dents that compromise surface integrity and aesthetics. | Utilize appropriate lifting equipment and protective coverings. Avoid dragging the sheet across rough surfaces. Store in a clean, dry environment. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Customized material handling platforms and supports, Corrosion-resistant industrial shelving and racking, Protective guards and barriers in chemical processing environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||