This 304 stainless steel stock sheet is a premium choice for demanding fabrication projects. Its robust construction and superior corrosion resistance make it ideal for a wide range of industrial and commercial applications requiring durability.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.343" |
| Length | 45" |
| Width | 20" |
Manufactured under strict quality controls, this 304 stainless steel sheet offers exceptional performance. With a nominal thickness of 0.343 inches, a length of 45 inches, and a width of 20 inches, it meets the rigorous demands of ASTM A240 standards. The austenitic 304 alloy provides excellent formability, weldability, and resistance to a broad spectrum of corrosive environments, including atmospheric conditions, food processing, and chemical exposure. Its inherent toughness and non-magnetic properties at room temperature further enhance its suitability for critical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and free from contaminants. 2. Accurately mark and cut the sheet to the required dimensions using appropriate cutting tools for stainless steel. 3. Prepare edges for welding or joining according to specific project requirements, ensuring proper surface treatment to maintain corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools, leading to contamination and reduced corrosion resistance. | Utilize dedicated stainless steel cutting tools (e.g., plasma cutters, abrasive saws with specific blades) to prevent carbide precipitation and maintain material integrity. |
| Improper surface preparation before welding, resulting in weak joints and potential corrosion initiation. | Thoroughly clean weld areas with stainless steel-specific degreasers and wire brushes. Use inert gas shielding during welding to prevent oxidation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabrication of machinery components, Food processing equipment and tanks, Architectural elements and cladding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||