This 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength, making it the premium choice for robust electrical enclosures, lighting fixtures, and industrial components.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.709" |
| Length | 43" |
| Width | 14" |
Built to exacting engineering tolerances, this 0.709-inch thick sheet of 304 stainless steel measures 43 inches in length and 14 inches in width. The inherent properties of 304 stainless steel, including its excellent corrosion resistance to a wide range of atmospheric environments and many corrosive media, along with its moderate strength and formability, ensure reliable performance in demanding electrical and lighting applications. This material's non-magnetic nature further enhances its suitability for sensitive electronic environments. Fabrication and welding are readily achievable using standard industrial practices.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Precisely cut the 304 stainless steel sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet to the intended structure using corrosion-resistant hardware.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners, which can lead to galvanic corrosion. | Always use stainless steel fasteners (304 or higher grade) compatible with the sheet material. |
| Allowing abrasive dust from cutting or grinding carbon steel to settle on the stainless steel surface. | Thoroughly clean the stainless steel sheet after fabrication and before installation to remove any potential contaminants. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosure Fabrication, Industrial Lighting Fixture Construction, Control Panel Backing Plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||