Engineered for demanding electrical and lighting applications, this 304 stainless steel stock sheet offers superior corrosion resistance and structural integrity. Its substantial thickness ensures durability.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.448" |
| Length | 23" |
| Width | 22" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.448 inches in thickness, 23 inches in length, and 22 inches in width. Composed of austenitic stainless steel, it exhibits excellent resistance to corrosion, oxidation, and a wide range of chemicals, making it suitable for harsh environmental conditions common in electrical installations. The material's inherent strength and formability allow for the fabrication of robust enclosures, mounting panels, and protective components that demand long-term reliability and aesthetic appeal in both indoor and outdoor settings. Its non-magnetic properties further enhance its utility in sensitive electrical environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully unpackage the stainless steel sheet, ensuring no damage to the surface. 2. Mark and cut the sheet to the required dimensions using appropriate metal cutting tools and safety equipment. 3. Fabricate and install the components, ensuring proper grounding and adherence to all electrical codes and standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools that can cause contamination and rust on the stainless steel surface. | Utilize dedicated stainless steel tools or thoroughly clean carbon steel tools before use to prevent cross-contamination. |
| Insufficient edge preparation for welding or bending, leading to structural weaknesses. | Ensure all edges are properly deburred and prepared according to fabrication best practices for 304 stainless steel before assembly. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosure Fabrication, Lighting Fixture Components, Control Panel Backing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||