This high-performance 304 stainless steel stock sheet offers exceptional corrosion resistance and formability, making it the premier choice for custom fabrication and demanding industrial applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.484" |
| Length | 21" |
| Width | 43" |
Manufactured under strict quality controls, this 304 stainless steel sheet boasts a precise thickness of 0.484 inches, a length of 21 inches, and a width of 43 inches. Composed primarily of chromium (18%) and nickel (8%), its austenitic structure provides excellent weldability, formability, and superior resistance to a wide range of corrosive environments, including atmospheric, food, and industrial chemicals. This makes it ideal for applications demanding longevity and inertness.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the fabrication area is clean and free of contaminants. 2. Carefully measure and cut the sheet to the required dimensions using appropriate cutting tools for stainless steel. 3. Perform welding or joining operations according to industry best practices for 304 stainless steel, ensuring proper filler material and shielding gas selection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools for cutting or grinding, leading to iron contamination and potential rust. | Utilize dedicated stainless steel cutting blades, grinding discs, and tools that have not been used on carbon steel. Clean all tools thoroughly before use. |
| Improper welding techniques causing sensitization and reducing corrosion resistance in the heat-affected zone. | Employ appropriate welding procedures for 304 stainless steel, including proper heat input control and post-weld cleaning. Consider solution annealing if extreme corrosion resistance is critical after welding. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Food processing equipment fabrication, Chemical storage tanks and piping, Architectural and structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||