This 304 stainless steel stock sheet offers superior corrosion resistance and durability for demanding material handling applications. Its robust construction ensures longevity in harsh environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.084" |
| Length | 38" |
| Width | 15" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.084 inches in thickness, 38 inches in length, and 15 inches in width. Composed of an austenitic chromium-nickel alloy, it exhibits excellent resistance to oxidation and a wide range of corrosive media, making it suitable for environments where hygiene and chemical inertness are paramount. The material's inherent strength and formability facilitate its integration into custom material handling systems, fabrication of chutes, hoppers, and protective barriers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean and level. 2. Position the stainless steel sheet according to design specifications. 3. Secure the sheet using appropriate fasteners or welding techniques, ensuring proper structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong gauge for the load capacity. | Consult engineering drawings or perform a load analysis to determine the appropriate thickness for the intended application. |
| Inadequate edge preparation for welding. | Properly bevel and clean all edges before welding to ensure full penetration and a strong, defect-free weld. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom chutes and hoppers, Protective guards and barriers, Work surfaces and shelves in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||