Engineered for demanding environments, this 304 stainless steel sheet provides exceptional strength and corrosion resistance. Its substantial gauge makes it ideal for critical load-bearing and structural bracing applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.348" |
| Length | 33" |
| Width | 46" |
Purpose-built for heavy-duty applications, this 304 stainless steel stock sheet offers superior tensile strength and extreme corrosion resistance, critical for environments exposed to moisture, chemicals, or corrosive agents. Measuring 0.348 inches in thickness, 33 inches in length, and 46 inches in width, this sheet is optimized for fabricating robust supporting structures, custom bracing systems, and heavy-duty enclosures. Its austenitic 304 composition ensures excellent weldability and formability, allowing for precise customization in fabrication processes for maximum structural integrity and longevity in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Assess load requirements and determine optimal sheet placement and support. 2. Precisely cut the sheet to the required dimensions using appropriate industrial cutting tools. 3. Securely fasten the sheet using corrosion-resistant hardware and structural welding techniques as per engineering specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized or lower-grade fasteners that can lead to premature structural failure. | Always utilize stainless steel fasteners (e.g., Grade 304 or 316) that are rated for the intended load capacity and environmental conditions. |
| Inadequate edge preparation or surface treatment prior to welding, compromising weld integrity. | Ensure all edges to be welded are clean, free from contaminants (oil, dirt, scale), and properly beveled if required by the joint design. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty structural bracing and supports, Custom fabrication of industrial equipment frames, Corrosion-resistant enclosures and panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||