This 304 stainless steel stock sheet offers superior corrosion resistance and durability. Precisely manufactured to 0.460" thickness, 15" length, and 13" width, it's an ideal raw material for a wide range of industrial and manufacturing projects.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.460" |
| Length | 15" |
| Width | 13" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet meets stringent quality requirements for critical applications. Its composition offers excellent formability and weldability. The material exhibits high tensile strength and a non-magnetic characteristic in its annealed state. With a thickness of 0.460 inches, a length of 15 inches, and a width of 13 inches, this sheet is suitable for fabrication of components requiring robust performance in corrosive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper handling and safety protocols are followed when cutting or machining. 2. Verify dimensions against design specifications before integration. 3. Clean surface thoroughly prior to welding or further processing to prevent contamination.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grade of stainless steel for a specific corrosive environment. | Always consult material compatibility charts and select 304 stainless steel for moderate to high corrosion resistance needs. |
| Improper welding techniques leading to sensitization and reduced corrosion resistance. | Employ appropriate welding procedures, such as TIG or MIG, and consider post-weld heat treatment if necessary to maintain alloy integrity. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Chemical processing equipment, Food and beverage industry components, Marine hardware and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||