This 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Precisely manufactured to 0.850" thickness, 13" width, and 35" length, it's engineered for robust industrial use.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.850" |
| Length | 13" |
| Width | 35" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a nominal thickness of 0.850 inches, a width of 35 inches, and a length of 13 inches. Composed of 18% chromium and 8% nickel, it provides superior resistance to atmospheric corrosion, oxidation, and many organic and inorganic chemicals. Its excellent formability and weldability make it suitable for a wide array of fabrication processes. The inherent passivation layer ensures long-term integrity in harsh environments, maintaining structural soundness under stress and chemical exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended application and environment. 2. Ensure proper cutting and shaping tools are selected for the 0.850" thickness. 3. If welding, utilize appropriate procedures for 304 stainless steel to maintain corrosion resistance at the weld zone.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools which can lead to contamination and reduced corrosion resistance. | Employ dedicated stainless steel cutting tools and ensure a clean work surface to prevent cross-contamination. |
| Inadequate post-weld cleaning, leaving behind flux or scale that compromises the passive layer. | Thoroughly clean and pickle all welds to restore the protective chromium oxide layer and ensure optimal corrosion resistance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Chemical processing equipment fabrication, Food and beverage industry components, Marine hardware and structural elements.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||