This substantial 0.719" thick 304 stainless steel stock sheet provides exceptional structural integrity. Its inherent corrosion resistance makes it the premier choice for demanding suspending and bracing applications in harsh environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.719" |
| Length | 33" |
| Width | 47" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet offers a robust 0.719" nominal thickness, precisely cut to 33" in width and 47" in length. Composed of a chromium-nickel alloy, it exhibits superior tensile strength and excellent resistance to pitting and crevice corrosion, crucial for prolonged performance in corrosive atmospheres, marine settings, and chemical processing environments. The material's non-magnetic properties and ability to withstand extreme temperature fluctuations further enhance its suitability for critical structural support and bracing systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Thoroughly clean the designated installation area and the stock sheet to remove any contaminants. 2. Precisely mark and drill mounting or attachment points according to structural load calculations and design specifications. 3. Securely fasten the stock sheet using appropriate grade 316 stainless steel fasteners and load-bearing hardware designed for the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incompatible fasteners that can lead to galvanic corrosion. | Always utilize grade 316 stainless steel fasteners or fasteners explicitly rated for use with 304 stainless steel in the specific environment. |
| Inadequate load distribution leading to premature structural failure. | Perform thorough structural analysis and ensure mounting points and bracing designs are engineered to distribute loads effectively across the sheet's surface. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty structural bracing in industrial facilities, Marine vessel support and rigging components, Corrosion-resistant platforms and suspended walkways.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||