This 304 stainless steel stock sheet is engineered for demanding electrical and lighting installations. Its robust construction ensures longevity and exceptional performance in corrosive or high-moisture settings.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.906" |
| Length | 21" |
| Width | 28" |
Purpose-built for heavy-duty applications, this 0.906-inch thick sheet of 304 stainless steel provides exceptional structural integrity and resistance to environmental degradation. Measuring 21 inches in length by 28 inches in width, its composition of approximately 18% chromium and 8% nickel imparts superior corrosion resistance, making it ideal for environments exposed to moisture, chemicals, and extreme temperatures. This material is non-magnetic in its annealed state and possesses excellent formability and weldability, facilitating complex fabrications for enclosures, mounting brackets, and protective housings in industrial electrical and lighting systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Precisely mark and drill mounting holes according to design specifications. 3. Securely fasten the sheet using appropriate corrosion-resistant hardware, ensuring even pressure distribution to prevent distortion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which can lead to galvanic corrosion. | Always utilize 304 or 316 stainless steel fasteners compatible with the sheet material. |
| Over-tightening fasteners, causing localized stress and potential material deformation. | Apply torque gradually and evenly across all fastening points, adhering to recommended specifications. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Industrial electrical enclosure fabrication, Outdoor lighting fixture mounting and protection, Corrosion-resistant electrical control panel construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||