This premium 304 stainless steel stock sheet offers exceptional corrosion resistance and durability. Precisely manufactured to exacting dimensions, it serves as a fundamental raw material for critical engineering and manufacturing projects.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.798" |
| Length | 35" |
| Width | 27" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet is manufactured to ASTM A240/A240M standards. Its robust composition, featuring a minimum of 18% chromium and 8% nickel, provides excellent resistance to a wide range of corrosive environments, making it suitable for demanding applications such as food processing equipment, chemical tanks, and architectural components. The sheet's precise dimensions of 0.798 inches (20.27 mm) thickness, 35 inches (889 mm) length, and 27 inches (685.8 mm) width ensure compatibility with advanced fabrication processes and adherence to strict design tolerances.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material specifications and dimensions against project requirements. 2. Prepare cutting and forming equipment according to standard operating procedures for 0.798" thick stainless steel. 3. Fabricate and assemble components, employing appropriate welding, bending, and fastening techniques for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using the wrong grade of stainless steel for the intended corrosive environment. | Always confirm the specific corrosive agents and operating temperatures to ensure 304 stainless steel is the appropriate grade. Consult material compatibility charts if unsure. |
| Inadequate handling and storage leading to surface contamination or damage. | Store sheets on a clean, flat surface, protected from moisture and impact. Use non-marring handling equipment to prevent scratches and contamination. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Food and Beverage Machinery, Architectural Cladding and Fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||