This heavy-gauge 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Its substantial thickness and generous dimensions make it ideal for demanding material handling, structural components, and custom fabrication projects.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.939" |
| Length | 47" |
| Width | 45" |
Precision-manufactured to tight tolerances, this 0.939-inch thick sheet of 304 stainless steel provides superior structural integrity and resistance to wear and corrosion, crucial for demanding industrial applications. Measuring 47 inches in length and 45 inches in width, it is fabricated from annealed 304 grade stainless steel, known for its excellent formability, weldability, and resistance to a wide range of chemicals and environments. Its robust nature makes it suitable for heavy-duty shelving, work surfaces, machine guards, and components within material handling systems where strength and longevity are paramount. The precise dimensions ensure seamless integration into complex assemblies and reduce post-fabrication adjustments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface ensuring it is clean, level, and capable of supporting the sheet's weight and intended load. 2. Position the 304 stainless steel sheet accurately according to design specifications, utilizing appropriate lifting equipment for the substantial mass. 3. Secure the sheet using specified fasteners (e.g., bolts, welds) at pre-determined intervals, ensuring even load distribution and structural stability.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Underestimating the weight of the sheet during handling and positioning. | Always use appropriate lifting equipment (e.g., overhead cranes, forklifts with specialized attachments) and ensure sufficient personnel are available for safe manual handling. |
| Inadequate surface preparation leading to uneven support or stress points. | Thoroughly inspect and prepare the mounting surface, addressing any imperfections, ensuring a flat and robust foundation for the sheet. |
| Improper fastening leading to premature failure or deformation. | Follow engineering drawings for fastener type, size, and spacing. Ensure all fasteners are properly torqued and that welding procedures are appropriate for 304 stainless steel. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty industrial shelving and racking, Custom work surfaces and countertops in corrosive environments, Structural components for material handling equipment, Machine guards and enclosures, Fabrication of specialized chutes and hoppers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||