This 304 stainless steel sheet, precisely engineered to 0.303" thickness, 19" length, and 23" width, offers exceptional corrosion resistance and structural integrity for critical pneumatic systems.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.303" |
| Length | 19" |
| Width | 23" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet offers superior performance in demanding pneumatic environments. With a thickness of 0.303 inches, a length of 19 inches, and a width of 23 inches, it provides ample material for fabricating robust pneumatic components. The inherent properties of 304 stainless steel, including its excellent resistance to a wide range of corrosive media and high tensile strength, ensure longevity and reliability in applications involving compressed air, gasses, and fluid handling. This sheet is ideal for custom enclosures, manifolds, structural supports, and other custom parts where material integrity and resistance to environmental factors are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines on the sheet. 2. Utilize appropriate cutting tools (e.g., laser cutter, waterjet, abrasive saw) for precise fabrication. 3. Deburr all cut edges to ensure a smooth finish and prevent potential damage to seals or mating components.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel for pneumatic components in corrosive environments. | Always specify 304 or 316 stainless steel for applications exposed to moisture, chemicals, or oxidizing agents to prevent premature corrosion and failure. |
| Neglecting edge finishing after cutting. | Thoroughly deburr and smooth all cut edges to prevent nicks, burrs, or sharp points that can compromise pneumatic seals, tubing, or operator safety. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom pneumatic manifold fabrication, Enclosures for pneumatic control panels, Structural components for pneumatic machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||