This industrial-grade 304 stainless steel stock sheet offers superior corrosion resistance and durability for robust shipping and packaging solutions. Precisely manufactured for critical applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.089" |
| Length | 34" |
| Width | 31" |
Manufactured under strict quality controls, this 304 stainless steel sheet boasts a nominal thickness of 0.089 inches (approximately 2.26 mm), with precise dimensions of 34 inches in length and 31 inches in width. Composed of 18% chromium and 8% nickel, it exhibits excellent resistance to oxidation and corrosion, making it ideal for environments exposed to moisture, chemicals, or high temperatures. Its inherent strength and formability allow for its use in custom protective packaging, durable shipping crates, and structural components within demanding industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of contaminants. 2. Precisely measure and mark cut lines according to design specifications. 3. Utilize appropriate cutting tools (e.g., shear, plasma cutter) for clean, accurate cuts. 4. Employ deburring tools to smooth all cut edges for safety and optimal fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools, leading to potential contamination and reduced corrosion resistance. | Always use dedicated stainless steel cutting tools and ensure they are clean and free of any ferrous material. |
| Improper handling causing scratches or dents, which can compromise the protective oxide layer. | Handle sheets with care, using clean gloves and avoiding dragging them across rough surfaces. Store sheets on a clean, flat surface with protective interleaving if necessary. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom protective packaging for sensitive equipment, Durable shipping crates and containers, Reinforcement and structural elements in industrial transport.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||