This 0.154" thick 304 stainless steel stock sheet, measuring 47" x 41", is engineered for superior performance in lubricating applications. Its robust construction ensures longevity and exceptional resistance to corrosive environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.154" |
| Length | 47" |
| Width | 41" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet offers a nominal thickness of 0.154 inches, a length of 47 inches, and a width of 41 inches. Fabricated from 304 stainless steel, it exhibits excellent corrosion resistance, formability, and weldability, making it suitable for demanding industrial environments. Its non-magnetic properties and hygienic surface finish are critical for applications involving contact with lubricants where contamination must be minimized.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris before handling. 2. Cut to the required dimensions using appropriate tooling for stainless steel. 3. Smooth all cut edges to prevent snagging and potential lubricant contamination.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive lubricant environments. | Always specify 304 stainless steel for its inherent corrosion resistance, preventing premature degradation and lubricant contamination. |
| Leaving cut edges sharp and unfinished. | Thoroughly deburr and smooth all cut edges to maintain surface integrity and prevent potential damage to seals or lubricant pathways. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Bearings and bushings, Guide rails and channels, Lubricant containment systems, Sealing surfaces in pump and valve assemblies.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||