This 304 stainless steel stock sheet is optimized for lubricating applications, providing exceptional corrosion resistance and a smooth surface finish. Its robust construction ensures long-term performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.136" |
| Length | 31" |
| Width | 32" |
Engineered for reliability and performance, this 304 stainless steel sheet boasts a precise thickness of 0.136 inches, a length of 31 inches, and a width of 32 inches. Composed of AISI 304 stainless steel, it exhibits excellent resistance to oxidation and corrosion, making it suitable for wet or chemical environments. The material's inherent lubricity and non-galling properties are critical for components in conveyor systems, guide rails, and other friction-sensitive applications, ensuring smooth operation and minimal wear.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free from debris. 2. Accurately align the sheet with pre-drilled holes or mounting points. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper surface preparation leading to poor adhesion or premature wear. | Thoroughly clean and degrease both the sheet and the mounting surface before installation. |
| Over-tightening fasteners, which can warp the sheet and affect its performance. | Use a torque wrench and follow recommended torque specifications for fasteners. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Conveyor system components, Guide rails and sliding surfaces, Bearings and bushings in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||