This 304 stainless steel stock sheet is engineered for demanding abrading and polishing processes. Its robust construction and superior corrosion resistance ensure exceptional performance and longevity in industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.152" |
| Length | 40" |
| Width | 21" |
Specified by design engineers worldwide, this 304 stainless steel sheet offers a nominal thickness of 0.152 inches (3.86mm), a standard length of 40 inches (1016mm), and a width of 21 inches (533.4mm). Composed of chromium-nickel alloy, it exhibits excellent formability, weldability, and resistance to oxidation and corrosion. Ideal for surface preparation, finishing operations, and fabrication of components requiring a high-quality, durable surface.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Inspect sheet for any damage or defects prior to use. 2. Ensure cutting and finishing tools are appropriate for 304 stainless steel. 3. Handle with care to prevent scratching or marring the surface during fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using general-purpose cutting tools not rated for stainless steel. | Employ carbide-tipped or diamond-coated cutting tools specifically designed for stainless steel to prevent tool wear and ensure clean cuts. |
| Allowing ferrous contamination during fabrication or handling. | Use dedicated stainless steel tools and work surfaces. Clean all tools and the surrounding area before and after working with the stainless steel sheet to prevent rust spots. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Surface preparation for coatings and plating, High-performance polishing substrates, Component fabrication requiring precise surface finishing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||