This robust 304 stainless steel stock sheet offers superior corrosion resistance and durability. Precisely manufactured to industrial standards, it is ideal for a wide range of demanding fabrication and construction projects.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.731" |
| Length | 32" |
| Width | 22" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet exhibits exceptional strength and formability. With a precise thickness of 0.731 inches, a length of 32 inches, and a width of 22 inches, it meets stringent dimensional tolerances. Composed of a chromium-nickel alloy, it provides excellent resistance to oxidation and a broad spectrum of corrosive agents, making it a preferred material for chemical processing equipment, food service machinery, architectural components, and marine applications where performance and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material cleanliness and absence of defects. 2. Precisely cut to required dimensions using appropriate industrial cutting tools. 3. Prepare edges for welding or fastening according to project specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard mild steel for corrosive environments. | Always specify 304 stainless steel for applications exposed to moisture, chemicals, or saltwater to prevent premature corrosion and failure. |
| Inadequate edge preparation before joining. | Ensure all cut edges are deburred and cleaned thoroughly to promote strong, defect-free welds or secure mechanical fastenings. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment Fabrication, Food and Beverage Industry Machinery, Architectural Cladding and Fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||