This 304 stainless steel stock sheet offers superior corrosion resistance and durability for demanding material handling applications. Precisely dimensioned for fabrication and integration into various systems.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.188" |
| Length | 25" |
| Width | 39" |
Manufactured under strict quality controls, this 0.188" thick, 25" x 39" sheet is composed of 304 stainless steel, a widely recognized austenitic alloy known for its excellent corrosion resistance, weldability, and formability. Its composition, typically containing 18% chromium and 8% nickel, provides significant protection against oxidation and many corrosive chemicals. This makes it an ideal material for constructing robust chutes, hoppers, custom trays, and structural components within material handling environments where hygiene and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet thoroughly to remove any surface contaminants. 2. Measure and mark cut lines with precision using appropriate marking tools. 3. Cut the sheet using industrial-grade cutting equipment (e.g., shear, plasma cutter) suitable for 0.188" thickness. 4. Deburr all cut edges to ensure safety and a smooth finish. 5. Fabricate and assemble according to design specifications using suitable welding or fastening techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can cause excessive heat or damage the material's protective oxide layer. | Employ cutting methods and tools specifically designed for stainless steel to maintain material integrity and prevent sensitization. |
| Inadequate edge preparation after cutting, leading to sharp edges and potential safety hazards. | Always deburr and smooth all cut edges thoroughly to remove burrs and create a safe, finished surface. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Chute and Hopper Fabrication, Material Handling Conveyor Components, Industrial Shelving and Work Surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||