This 0.146" thick 304 stainless steel stock sheet offers exceptional durability and corrosion resistance, ideal for demanding electrical and lighting enclosures and components. Engineered for longevity and performance.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.146" |
| Length | 35" |
| Width | 13" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet is manufactured to exacting standards, ensuring superior performance in critical applications. Measuring 0.146 inches in thickness, with precise dimensions of 35 inches in length and 13 inches in width, it provides ample material for fabrication. The inherent properties of 304 stainless steel, including its excellent corrosion resistance, high tensile strength, and formability, make it the material of choice for environments exposed to moisture, chemicals, or extreme temperatures, commonly found in electrical and lighting infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet surface thoroughly to remove any contaminants. 2. Fabricate to required dimensions using appropriate cutting and bending techniques. 3. Securely install fabricated components using approved fastening methods.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive environments. | Always specify 304 stainless steel for applications exposed to moisture or chemicals to prevent premature corrosion and failure. |
| Inadequate edge finishing after cutting. | Ensure all cut edges are deburred and smoothed to prevent snags and potential safety hazards. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosures, Lighting Fixture Housings, Control Panel Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||