This 0.996-inch thick 304 stainless steel stock sheet offers exceptional corrosion resistance and formability. Precisely manufactured to 24" x 20", it serves as a robust foundation for demanding industrial fabrication and engineering projects.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.996" |
| Length | 24" |
| Width | 20" |
Specified by design engineers worldwide, this 304 stainless steel stock sheet (0.996" thickness, 24" length, 20" width) leverages the inherent benefits of austenitic stainless steel. Its composition provides excellent resistance to a wide range of corrosive environments, including atmospheric, food, and mild chemical exposures. The material exhibits good weldability and formability, making it suitable for complex fabrications. Typical applications include chemical processing equipment, food processing machinery, architectural components, and marine hardware where robust performance and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure proper handling and safety precautions are observed due to the material's weight and sharp edges. 2. Clean the sheet surface to remove any contaminants prior to fabrication. 3. Fabricate according to design specifications, utilizing appropriate welding, cutting, and forming techniques for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools without proper consideration, leading to potential contamination and reduced corrosion resistance. | Utilize dedicated stainless steel cutting tools and maintain strict cleanliness protocols to prevent cross-contamination. |
| Inadequate support during welding, leading to distortion and compromising structural integrity. | Employ appropriate fixturing and welding procedures to manage heat input and prevent warping. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Food and Beverage Machinery, Architectural Fabrication, Marine Hardware, Industrial Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||