This 304 stainless steel stock sheet is engineered for demanding lubricating applications. Its robust construction ensures exceptional performance and longevity in corrosive environments.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.741" |
| Length | 16" |
| Width | 23" |
Purpose-built for heavy-duty applications, this 304 stainless steel stock sheet measures 0.741 inches in thickness, with dimensions of 16 inches in length and 23 inches in width. Fabricated from grade 304 stainless steel, it offers superior corrosion resistance, excellent weldability, and high tensile strength, making it ideal for components within lubricating systems such as wear plates, guide rails, and housing elements where consistent friction reduction and material integrity under load are paramount. This material's inherent passivation layer effectively resists oxidation and chemical attack, ensuring prolonged service life in continuous operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free from debris. 2. Accurately position the sheet according to design specifications. 3. Secure the sheet using appropriate fasteners or welding techniques, adhering to all safety protocols.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade of stainless steel susceptible to corrosion. | Always specify and verify 304 stainless steel for its proven resistance to a wide range of corrosive media common in lubricating systems. |
| Improper surface preparation leading to poor component mating. | Thoroughly clean and deburr all edges and surfaces of the sheet before installation to ensure optimal contact and performance. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Wear plates in conveyor systems, Guide rails for sliding mechanisms, Components within bearing housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||