This 304 stainless steel stock sheet offers exceptional corrosion resistance and formability. Precisely manufactured to a 0.896" thickness, it's a robust raw material for a wide range of industrial fabrication needs.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.896" |
| Length | 38" |
| Width | 15" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet measures 0.896 inches in thickness, 38 inches in length, and 15 inches in width. Composed of 18% chromium and 8% nickel, it exhibits excellent resistance to a broad spectrum of corrosive environments and atmospheric conditions. Its high tensile strength and ductility make it suitable for complex forming operations, welding, and general fabrication. This grade is widely specified for chemical processing equipment, food handling machinery, architectural elements, and marine components due to its inherent durability and ease of maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface finish against project requirements. 2. Prepare cutting and forming equipment to accommodate the specified thickness and material properties. 3. Fabricate, weld, and finish according to industry best practices for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for thick stainless steel, leading to excessive wear and poor cut quality. | Employ high-speed steel or carbide-tipped cutting tools specifically rated for cutting stainless steel of this gauge. |
| Insufficient pre-cleaning before welding, resulting in weld porosity and compromised structural integrity. | Thoroughly degrease and remove any surface contaminants from the weld area using stainless steel-specific solvents. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Industrial Fabrication, Chemical Processing Equipment, Food Service Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||