This 304 stainless steel stock sheet is engineered for robust suspending and bracing applications. Its superior corrosion resistance and mechanical properties ensure long-term structural integrity in demanding environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.674" |
| Length | 42" |
| Width | 20" |
Precision-manufactured to tight tolerances, this 304 stainless steel stock sheet measures 0.674 inches in thickness, 42 inches in length, and 20 inches in width. Composed of Austenitic chromium-nickel, it exhibits excellent corrosion resistance against a wide range of chemicals and atmospheric conditions, along with good formability and weldability. This material's inherent strength and durability make it suitable for critical structural components, industrial framework, and custom bracing solutions where reliability under load and environmental exposure is paramount. The substantial thickness provides exceptional rigidity and load-bearing capacity for demanding applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and material integrity before cutting or shaping. 2. Cut sheet to required dimensions using appropriate industrial cutting tools for stainless steel. 3. Securely fasten or weld sheet into intended suspending or bracing configuration per engineering design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners for the sheet thickness and load requirements. | Select fasteners with appropriate diameter and tensile strength to match the 0.674" sheet thickness and the calculated structural loads. |
| Improper welding procedures leading to sensitization and reduced corrosion resistance. | Employ inert gas welding techniques (e.g., TIG) and maintain interpass temperatures below 300°F (150°C) to preserve the material's corrosion properties. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Industrial structural bracing, Heavy-duty suspension systems, Custom machinery framework.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||