This 304 Stainless Steel stock sheet, precisely cut to 0.118" thickness, 32" length, and 29" width, offers superior corrosion resistance and structural integrity for demanding suspending and bracing applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.118" |
| Length | 32" |
| Width | 29" |
Specified by design engineers worldwide, this 304 stainless steel sheet meets stringent industry standards for material performance and dimensional accuracy. Its 0.118" (3mm) thickness provides substantial load-bearing capacity suitable for robust bracing systems and overhead suspending structures. The inherent properties of 304 stainless steel, including excellent resistance to oxidation and a wide range of corrosive media, ensure long-term durability in diverse environmental conditions, from industrial settings to marine applications. This sheet is engineered for reliable fabrication and integration into critical infrastructure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the sheet according to the required component dimensions. 2. Utilize appropriate cutting tools (e.g., plasma cutter, abrasive saw) for precise shaping. 3. Fabricate and install using suitable fasteners and joining methods, ensuring structural integrity.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners or inadequate joining techniques. | Consult structural load calculations and employ fasteners rated for the anticipated loads and environmental conditions. |
| Not accounting for thermal expansion in long-span bracing. | Incorporate expansion joints or flexible connections where significant temperature fluctuations are expected. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Structural bracing in corrosive environments, Suspension systems for industrial equipment, Custom fabrication for marine hardware.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||