This 304 stainless steel stock sheet offers exceptional corrosion resistance and formability, making it ideal for demanding fabrication projects. Precisely sized for efficient material utilization in a variety of industrial applications.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.541" |
| Length | 16" |
| Width | 34" |
Precision-manufactured to tight tolerances, this 304 stainless steel sheet boasts a thickness of 0.541 inches, a length of 16 inches, and a width of 34 inches. Composed of chromium (18%) and nickel (8%), it exhibits excellent resistance to pitting and crevice corrosion, and good weldability. Its ductile nature allows for complex forming operations. Suitable for food processing equipment, chemical storage tanks, architectural components, and general metal fabrication where durability and hygiene are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of contaminants. 2. Accurately measure and mark cut lines according to design specifications. 3. Utilize appropriate cutting tools for stainless steel, maintaining a steady feed rate to prevent heat buildup and distortion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel tools for cutting or forming. | Always use dedicated stainless steel tooling and lubricants to prevent carbon steel contamination and galling. |
| Inadequate edge preparation before welding. | Properly bevel and clean all edges to ensure full penetration and a strong, corrosion-resistant weld. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom Industrial Enclosures, Specialty Fabrication Components, Corrosion-Resistant Tanks and Vessels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||