This 0.807-inch thick 304 stainless steel stock sheet is engineered for demanding electrical and lighting environments. Its superior corrosion resistance and mechanical strength ensure long-term performance.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.807" |
| Length | 22" |
| Width | 40" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.807 inches in thickness, with dimensions of 22 inches in length and 40 inches in width. The 304 alloy provides excellent corrosion resistance, particularly against a wide range of atmospheric and chemical agents, making it ideal for environments where moisture or corrosive substances are present. Its high tensile strength and ductility allow for fabrication and forming without compromising structural integrity. This material is commonly specified for enclosures, mounting panels, and structural components within electrical distribution systems, lighting fixtures, and control cabinets, where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free from debris. 2. Precisely cut the sheet to the required dimensions using appropriate metalworking tools. 3. Secure the sheet using approved fasteners or welding techniques suitable for 304 stainless steel.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which can lead to galvanic corrosion when in contact with stainless steel. | Always utilize 304 or 316 stainless steel fasteners to maintain material compatibility and prevent corrosion. |
| Improper cutting techniques that can induce excessive heat and alter the material's metallurgical properties or passivation layer. | Employ cutting methods like abrasive cutting with flood coolant or plasma cutting with appropriate gas mixtures to minimize heat affected zones. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosures and Cabinets, Lighting Fixture Housings, Control Panel Substrates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||