This 304 stainless steel stock sheet provides exceptional corrosion resistance and mechanical strength, making it the premier choice for demanding electrical and lighting applications requiring long-term structural integrity.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.982" |
| Length | 29" |
| Width | 33" |
Built to exacting engineering tolerances, this 0.982-inch thick 304 stainless steel sheet measures 29 inches in length and 33 inches in width. Fabricated from UNS S30400, it boasts a minimum tensile strength of 517 MPa and yield strength of 205 MPa, ensuring exceptional durability and resistance to environmental degradation. Its non-magnetic properties and excellent weldability make it ideal for fabricating secure, long-lasting electrical enclosures, control panels, junction boxes, and structural components for outdoor and industrial lighting systems. The material's inherent passivation layer provides superior protection against rust and chemical attack.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure substrate is clean, dry, and free of debris. 2. Precisely cut sheet to required dimensions using appropriate metalworking tools. 3. Secure sheet using approved fasteners or welding techniques, adhering to electrical code requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper edge preparation prior to welding. | Thoroughly clean and bevel edges to ensure optimal weld penetration and structural integrity. |
| Using incompatible fasteners that can cause galvanic corrosion. | Utilize fasteners specifically rated for 304 stainless steel or use appropriate insulating washers. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosures, Control Panel Fabrication, Industrial Lighting Fixture Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||