Engineered for extreme environments, this robust 304 stainless steel sheet provides exceptional durability and corrosion resistance for critical material handling and fabrication needs.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.872" |
| Length | 45" |
| Width | 14" |
Purpose-built for heavy-duty applications, this 304 stainless steel stock sheet boasts a substantial 0.872" thickness, ensuring exceptional structural integrity and load-bearing capacity. Measuring 45" in length and 14" in width, its generous dimensions facilitate custom fabrication for a wide array of material handling solutions. The inherent corrosion resistance of 304 stainless steel makes it ideal for environments exposed to moisture, chemicals, and corrosive elements, preventing material degradation and extending service life in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions against project specifications. 2. Prepare surfaces for joining or mounting according to design requirements. 3. Secure sheet using appropriate welding, bolting, or adhesive methods for the application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive environments. | Always specify 304 stainless steel for applications exposed to moisture or chemicals to prevent premature corrosion and failure. |
| Inadequate structural analysis for heavy loads. | Ensure the 0.872" thickness is sufficient for the intended load capacity; consult structural engineering if uncertain. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Heavy-duty shelving and work surfaces, Custom material carts and platforms, Protective barriers and machine guarding.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||