This 304 Stainless Steel Stock Sheet offers superior corrosion resistance and durability, making it ideal for critical safety applications. Its robust construction ensures longevity in demanding environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.872" |
| Length | 31" |
| Width | 34" |
Manufactured under strict quality controls, this 304 Stainless Steel Stock Sheet exhibits excellent mechanical properties. With a thickness of 0.872 inches, a length of 31 inches, and a width of 34 inches, it meets rigorous industrial standards. The inherent passivation of 304 stainless steel provides a protective oxide layer, ensuring resistance to a wide range of corrosive agents and preventing rust. Its formability and weldability facilitate integration into complex safety structures and equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of contaminants. 2. Carefully position the sheet according to design specifications, utilizing appropriate lifting equipment if necessary. 3. Secure the sheet using approved fastening methods, ensuring structural integrity and adherence to safety codes.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper handling leading to scratches or dents. | Use protective gloves and avoid dropping or dragging the sheet across abrasive surfaces. |
| Inadequate surface preparation before welding or fastening. | Thoroughly degrease and remove any surface oxidation or debris from the intended joining areas. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Machine guards and enclosures, Safety barriers and partitions, Corrosion-resistant fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||