This robust 304 stainless steel stock sheet offers exceptional durability and corrosion resistance. Engineered to precise dimensions, it is the superior choice for critical electrical and lighting infrastructure where longevity and performance are paramount.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.872" |
| Length | 16" |
| Width | 28" |
Trusted by engineers across multiple sectors, this 304 stainless steel stock sheet is fabricated to exacting standards. Measuring 0.872 inches in thickness, 16 inches in length, and 28 inches in width, its inherent properties of excellent corrosion resistance, high tensile strength, and formability make it ideal for environments exposed to moisture, chemicals, and extreme temperatures. Its non-magnetic nature and good weldability further enhance its suitability for demanding electrical enclosures, lighting fixtures, and structural components within hazardous or corrosive industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean, dry, and free from debris. 2. Carefully position the sheet using appropriate lifting equipment, ensuring safety protocols are followed. 3. Secure the sheet according to project specifications using approved fasteners or welding techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using improper cutting tools that can lead to burrs or material deformation. | Utilize high-quality cutting tools specifically designed for stainless steel, such as abrasive cut-off wheels or plasma cutters, and maintain proper tool speed and feed rates. |
| Inadequate surface preparation before welding, leading to poor weld integrity. | Thoroughly clean the weld joint with a stainless steel brush and solvent to remove any contaminants, oils, or oxides before commencing welding. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosure Fabrication, Industrial Lighting Fixture Components, Corrosion-Resistant Structural Supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||