This 0.846-inch thick 304 stainless steel stock sheet offers superior corrosion resistance and durability, making it an ideal material for demanding electrical and lighting infrastructure projects.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.846" |
| Length | 43" |
| Width | 34" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet boasts a thickness of 0.846 inches, a length of 43 inches, and a width of 34 inches. Composed of 18% chromium and 8% nickel, it exhibits excellent resistance to oxidation and corrosion, crucial for environments exposed to moisture or chemicals. Its high tensile strength and formability ensure reliable performance in structural components for electrical enclosures, lighting fixtures, and electrical panel backings where longevity and safety are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove any debris or contaminants. 2. Position the stainless steel sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners which can lead to galvanic corrosion. | Always use 304 stainless steel compatible fasteners to maintain the integrity of the assembly. |
| Improper handling leading to scratches or dents that compromise the surface finish and corrosion resistance. | Handle the sheet with care, using non-abrasive tools and protective coverings during installation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosure Fabrication, Lighting Fixture Backing Plates, Industrial Control Panel Construction.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||