This 304 stainless steel stock sheet provides robust material handling solutions. Its superior corrosion resistance and mechanical strength make it ideal for demanding industrial environments where durability is paramount.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.762" |
| Length | 41" |
| Width | 38" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.762 inches thick, 41 inches in length, and 38 inches in width. Composed of a minimum of 18% chromium and 8% nickel, it offers excellent resistance to corrosion and oxidation, meeting ASTM A240 specifications. This alloy is non-magnetic in the annealed condition and exhibits good formability and weldability, making it suitable for custom fabrication in chemical processing, food and beverage handling, and general industrial equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Position the sheet accurately according to design specifications. 3. Secure the sheet using appropriate fasteners or welding methods as dictated by the application and load requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper fastener selection leading to galvanic corrosion. | Utilize fasteners made of equivalent or nobler materials than 304 stainless steel, such as 18-8 stainless steel fasteners. |
| Distortion during cutting or bending due to excessive heat. | Employ controlled cutting speeds and appropriate cooling methods. For bending, ensure a sufficient bend radius to prevent surface cracking. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom fabricated chutes and hoppers, Conveyor system components, Work surfaces and countertops in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||