This robust 304 stainless steel stock sheet is engineered for demanding electrical and lighting applications. Its superior corrosion resistance and mechanical strength ensure long-term performance in harsh environments.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.726" |
| Length | 22" |
| Width | 38" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures 0.726 inches in nominal thickness, 22 inches in width, and 38 inches in length. Composed of 18% chromium and 8% nickel, this austenitic alloy offers excellent resistance to corrosion, oxidation, and pitting, making it ideal for fabricating electrical enclosures, junction boxes, conduit fittings, and lighting fixtures. Its non-magnetic properties and work-hardening characteristics facilitate easy fabrication and welding, ensuring structural integrity in demanding industrial and commercial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify sheet dimensions and material grade against project specifications. 2. Clean surface thoroughly to remove any contaminants before fabrication. 3. Fabricate components according to design requirements, ensuring proper edge preparation for joining.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade of stainless steel not suited for corrosive environments. | Always specify and verify 304 grade stainless steel for its proven corrosion resistance in electrical applications. |
| Inadequate surface preparation leading to compromised adhesion or corrosion. | Ensure the sheet surface is meticulously cleaned and free of oils, greases, or debris prior to any processing or assembly. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosures & Housings, Lighting Fixture Components, Control Panel Fabrication, Junction Boxes, Conduit Fittings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||