This premium 304 stainless steel stock sheet offers exceptional strength and corrosion resistance. Precisely manufactured to meet stringent industrial standards, it's a reliable foundation for a wide array of fabrication projects.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.724" |
| Length | 41" |
| Width | 27" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet measures a robust 0.724 inches in thickness, 41 inches in length, and 27 inches in width. Composed of an austenitic alloy with a minimum of 18% chromium and 8% nickel, it exhibits outstanding resistance to oxidation and a broad spectrum of corrosive environments. Its excellent formability and weldability make it suitable for demanding applications in chemical processing, food and beverage equipment, marine hardware, and architectural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material dimensions and surface integrity against project requirements. 2. Employ appropriate cutting and forming techniques for 0.724" thick 304 stainless steel. 3. Ensure proper surface preparation and welding procedures are followed to maintain corrosion resistance.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel cutting tools without proper precautions, leading to work hardening and potential corrosion initiation. | Utilize high-speed steel or carbide-tipped cutting tools with adequate lubrication and cooling to minimize heat buildup and prevent premature tool wear. |
| Inadequate cleaning after fabrication, leaving behind contaminants that can compromise the passive oxide layer. | Thoroughly degrease and pickle the fabricated components to remove any residual oils, scale, or foreign particles, then passivate to restore the protective oxide layer. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Chemical Processing Equipment, Food and Beverage Machinery, Marine and Offshore Components, Architectural Cladding, Industrial Tanks and Vessels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||