This 304 stainless steel stock sheet offers superior corrosion resistance and mechanical strength. Its robust nature makes it ideal for demanding electrical and lighting enclosure fabrication and structural components.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.721" |
| Length | 40" |
| Width | 36" |
Manufactured under strict quality controls, this 304 stainless steel sheet meets stringent industry standards for electrical and lighting applications. Measuring 0.721 inches in thickness, 40 inches in length, and 36 inches in width, it provides substantial material for robust construction. The 304 alloy offers excellent resistance to oxidation and a wide range of corrosive environments, ensuring long-term performance and integrity in demanding settings. Its formability and weldability facilitate complex designs and secure assembly.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cut lines based on design specifications. 2. Utilize appropriate cutting tools (e.g., laser, plasma, or abrasive waterjet) for precise shaping. 3. Ensure proper surface preparation, including deburring and cleaning, before assembly or further fabrication.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive environments. | Always specify 304 stainless steel for applications exposed to moisture, chemicals, or high humidity to prevent premature corrosion and failure. |
| Inadequate material thickness for structural integrity. | Verify the required load-bearing capacity and environmental stresses to select the appropriate sheet thickness, such as the 0.721" offered here, for robust support. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosure Fabrication, Lighting Fixture Housings, Control Panel Backings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||