Engineered for robust electrical and lighting installations, this 304 stainless steel sheet provides exceptional durability and corrosion resistance. Its substantial gauge ensures structural integrity in challenging industrial environments.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.704" |
| Length | 17" |
| Width | 43" |
Designed for demanding industrial environments, this 304 stainless steel stock sheet offers superior strength and corrosion resistance. With precise dimensions of 0.704 inches in thickness, 17 inches in length, and 43 inches in width, it is ideal for fabricating robust electrical enclosures, control panels, and lighting fixtures that require long-term performance and protection against environmental factors. The inherent properties of 304 stainless steel, including its excellent weldability and resistance to a wide range of chemicals, make it a prime choice for critical infrastructure and high-exposure areas.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely align the sheet according to the enclosure or fixture design. 3. Secure the sheet using appropriate fasteners (e.g., stainless steel screws or rivets) at recommended intervals for optimal stability.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners that can lead to galvanic corrosion. | Always use 304-grade stainless steel or equivalent fasteners to maintain corrosion resistance. |
| Over-tightening fasteners, which can deform the sheet or damage mounting points. | Apply even pressure and tighten fasteners to a snug fit, avoiding excessive force. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosure Fabrication, Control Panel Construction, Industrial Lighting Fixture Housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||