A robust 304 stainless steel stock sheet engineered for superior durability and corrosion resistance. Its substantial gauge and dimensions make it ideal for demanding material handling environments.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.691" |
| Length | 24" |
| Width | 34" |
A high-performance industrial component, this 304 stainless steel stock sheet boasts exceptional strength and longevity. With a precise thickness of 0.691 inches, a length of 24 inches, and a width of 34 inches, it offers a substantial surface area for various material handling solutions. Fabricated from premium 304 stainless steel (UNS S30400), it provides excellent resistance to rust, oxidation, and a wide range of corrosive chemicals, ensuring reliable performance in diverse industrial settings. This material's inherent toughness and formability allow for custom fabrication into chutes, hoppers, protective barriers, and custom shelving.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean and structurally sound. 2. Position the stock sheet according to the design specifications, utilizing appropriate lifting equipment if necessary. 3. Secure the stock sheet using approved fastening methods (e.g., welding, bolting) at designated points, ensuring a stable and permanent installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to poor adhesion or structural compromise. | Thoroughly clean and degrease the mounting surface to ensure optimal contact and structural integrity. |
| Using incorrect or insufficient fasteners, resulting in an unstable installation. | Employ fasteners rated for the intended load and material, and ensure they are installed according to best practices for stainless steel. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Custom chutes and hoppers for bulk material transfer, Protective barriers and guards in high-traffic areas, Work surfaces and shelving in corrosive environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||