This 304 stainless steel stock sheet offers exceptional strength and corrosion resistance, making it ideal for critical suspending and bracing applications where longevity and structural integrity are paramount.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.641" |
| Length | 36" |
| Width | 16" |
Engineered for reliability and performance, this 304 stainless steel sheet boasts a substantial thickness of 0.641 inches, a generous length of 36 inches, and a width of 16 inches. The superior corrosion resistance inherent to 304 stainless steel (AISI 304 / UNS S30400) ensures extended service life in harsh environments, resisting rust, pitting, and general corrosion. Its high tensile strength and yield strength provide robust support for demanding structural loads, making it an excellent choice for custom fabrication in industrial, marine, and construction sectors requiring dependable bracing and suspension solutions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from contaminants before fabrication. 2. Cut to the required dimensions using appropriate metalworking tools for stainless steel. 3. Form, drill, or weld according to your specific design, utilizing compatible stainless steel welding rods and techniques.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard carbon steel fasteners on 304 stainless steel. | Always use stainless steel fasteners of comparable grade (e.g., 304 or 316) to prevent galvanic corrosion and ensure long-term joint integrity. |
| Inadequate edge preparation before welding. | Thoroughly clean and bevel edges to the correct angle for full penetration welds, removing any scale or passivation layer that may have formed. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Structural bracing for heavy equipment, Custom mounting hardware for marine environments, Support frames for industrial machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||