This robust 304 stainless steel stock sheet is engineered for extreme environments. Its superior corrosion resistance and excellent machinability make it the optimal choice for critical lubricating system components.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.617" |
| Length | 34" |
| Width | 41" |
Engineered for reliability and performance, this 304 stainless steel stock sheet boasts a precise thickness of 0.617 inches, a length of 34 inches, and a width of 41 inches. Manufactured from austenitic grade 304 stainless steel, it offers exceptional resistance to a wide range of corrosive media, including mild acids and alkalis, making it ideal for applications where chemical inertness is paramount. Its high tensile strength and ductility ensure durability under demanding operational conditions, preventing premature wear and system failure in high-pressure or abrasive lubricating environments. The smooth surface finish minimizes friction and enhances lubricant flow.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify material compatibility with the intended lubricating fluid and operating environment. 2. Ensure all cutting and machining operations are performed with appropriate lubrication to prevent galling and maintain surface integrity. 3. Thoroughly clean the installed component to remove any residual machining debris before introducing lubricant.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard stainless steel grades in highly corrosive lubricating systems. | Always specify 304 stainless steel or higher alloys for superior corrosion resistance in aggressive media. |
| Inadequate cleaning after machining, leading to abrasive particle contamination. | Implement a rigorous cleaning protocol post-machining to ensure contaminant-free operation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Bearing cages and retainers in corrosive environments, Shaft sleeves and bushings for pumps handling chemicals, Components within high-pressure lubrication systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||