This robust 304 stainless steel stock sheet is engineered for demanding industrial lubrication systems and components. Its superior corrosion resistance and structural integrity ensure reliable performance under extreme conditions.
| Standard | ISO 9001 |
| Material | 304 Stainless Steel |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.605" |
| Length | 19" |
| Width | 30" |
Purpose-built for heavy-duty applications, this 0.605-inch thick, 19-inch wide, and 30-inch long sheet is fabricated from premium 304 stainless steel. Renowned for its excellent corrosion resistance, particularly against a wide range of atmospheric and chemical agents, this material offers superior tensile strength and formability. The inherent passivity of the chromium oxide layer provides long-term protection against pitting and crevice corrosion, making it an ideal substrate for wear surfaces, bearing housings, and lubricant reservoirs in environments subjected to moisture, salts, and industrial fluids. Its non-magnetic properties also contribute to its suitability in specialized equipment.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the mounting surface, ensuring it is clean, dry, and free from debris. 2. Precisely cut the sheet to the required dimensions using appropriate industrial cutting tools. 3. Secure the sheet using manufacturer-recommended fasteners, ensuring even pressure distribution to avoid deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel cutting tools that can cause excessive heat and work hardening. | Employ carbide-tipped or specialized alloy cutting tools designed for stainless steel to minimize heat and maintain material integrity. |
| Inadequate surface preparation leading to poor adhesion or premature wear. | Thoroughly degrease and abrade the surface to ensure optimal contact and lubrication film formation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Lubricant reservoir fabrication, Bearing retainer plates, Wear strips and guides in conveyor systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||