This robust 0.590-inch thick 304 stainless steel stock sheet offers superior corrosion resistance and strength. Precisely cut to 14" x 13", it's engineered for demanding industrial safety and fabrication needs.
| Standard | ASTM A106 |
| Material | 304 Stainless Steel |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.590" |
| Length | 14" |
| Width | 13" |
Specified by design engineers worldwide, this 304 stainless steel sheet conforms to ASTM A240 standards, ensuring exceptional performance in corrosive environments. Its substantial 0.590" (15mm) thickness provides significant structural integrity for applications requiring high load-bearing capacity or impact resistance. The material's inherent toughness and passivity make it ideal for chemical processing, food and beverage industries, and general manufacturing where hygiene and durability are paramount. This sheet delivers reliable, long-term service in aggressive conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the work area is clean and free of debris. 2. Carefully position the sheet using appropriate lifting equipment. 3. Secure the sheet according to project-specific fabrication or fastening requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard steel in corrosive environments, leading to premature degradation. | Always specify 304 or higher-grade stainless steel for applications exposed to moisture, chemicals, or salt spray. |
| Underestimating the required thickness for structural load-bearing applications. | Consult engineering drawings or perform load calculations to determine the appropriate sheet thickness for your specific structural needs. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Machine guarding and enclosures, Corrosion-resistant structural components, Food processing equipment fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||