This robust 304 stainless steel sheet offers superior corrosion resistance and mechanical strength, ideal for demanding industrial safety applications requiring long-term durability and hygiene.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.516" |
| Length | 21" |
| Width | 47" |
A proven choice for industrial professionals, this 304 stainless steel stock sheet measures 0.516 inches thick, 21 inches in length, and 47 inches in width. Fabricated from Type 304 stainless steel, it boasts excellent resistance to a wide range of corrosive media, including atmospheric conditions, food processing chemicals, and many organic and inorganic compounds. Its inherent strength and non-magnetic properties make it suitable for fabrication into machine guards, containment barriers, or protective panels where both safety and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the installation area thoroughly to ensure a smooth, debris-free surface. 2. Position the 304 stainless steel sheet according to the design specifications, ensuring proper alignment. 3. Secure the sheet using appropriate fasteners, such as bolts, rivets, or welding, as dictated by the application's structural requirements and safety standards.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect fasteners that can corrode or compromise structural integrity. | Utilize stainless steel fasteners of comparable grade (e.g., 304 or 316) to prevent galvanic corrosion and ensure long-term joint strength. |
| Failing to deburr edges after cutting, creating a safety hazard. | Always deburr and smooth all cut edges to eliminate sharp points and prevent potential injuries during handling and operation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Machine Guarding, Industrial Barriers and Partitions, Food Processing Equipment Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||