This 0.507" thick 304 stainless steel stock sheet offers superior corrosion resistance and strength. Precisely manufactured to 42" x 21", it's an ideal choice for rugged electrical and lighting applications.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.507" |
| Length | 42" |
| Width | 21" |
A high-performance industrial component, this 304 stainless steel stock sheet is engineered for demanding environments. With a substantial thickness of 0.507 inches and dimensions of 42 inches in length by 21 inches in width, it provides exceptional structural integrity. The 304 stainless steel alloy offers excellent resistance to a wide range of corrosive agents, making it suitable for applications where chemical exposure and oxidation are prevalent. Its non-magnetic properties and high tensile strength further enhance its utility in sensitive electrical and lighting systems. This material is compliant with relevant industry standards for durability and performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation area is clean and free of debris. 2. Precisely cut the sheet to the required dimensions using appropriate metalworking tools. 3. Securely fasten the sheet using industry-approved fasteners and mounting hardware, ensuring electrical isolation where necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for thick stainless steel. | Utilize specialized carbide-tipped blades or abrasive cutting discs designed for cutting hard metals to prevent blade damage and ensure clean cuts. |
| Improper grounding or electrical bonding in sensitive applications. | Consult electrical schematics and relevant codes to ensure correct grounding and bonding procedures are followed, especially in environments with potential electrical hazards. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosure Fabrication, Lighting Fixture Housings, Control Panel Backings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||