This 0.435-inch thick 304 stainless steel stock sheet offers exceptional durability and corrosion resistance, making it a premium choice for demanding electrical and lighting applications.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.435" |
| Length | 17" |
| Width | 18" |
Manufactured under strict quality controls, this 304 stainless steel stock sheet measures 0.435 inches in thickness, 17 inches in length, and 18 inches in width. Composed primarily of chromium (18%) and nickel (8%), this austenitic stainless steel alloy provides excellent resistance to oxidation and a wide range of corrosive environments, crucial for electrical enclosures, conduit fittings, and lighting fixture components. Its inherent strength and formability allow for precise fabrication and long-term performance in industrial and commercial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris. 2. Precisely cut or form the sheet to the required dimensions for your enclosure or component. 3. Securely fasten the fabricated sheet using appropriate industrial fasteners, ensuring electrical continuity is maintained where necessary.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using thinner gauge material for load-bearing electrical enclosures. | Select a gauge appropriate for the expected structural loads and environmental conditions to prevent deformation or failure. |
| Failing to properly ground fabricated components made from this sheet. | Implement robust grounding procedures during installation to ensure electrical safety and compliance with codes. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Electrical Enclosure Fabrication, Lighting Fixture Components, Control Panel Substrates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||