Engineered for robust pneumatic systems, this 0.410" thick 304 stainless steel stock sheet provides exceptional corrosion resistance and dimensional stability for critical components and housings.
| Standard | DIN 933 |
| Material | 304 Stainless Steel |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.410" |
| Length | 14" |
| Width | 14" |
Built to exacting engineering tolerances, this 304 stainless steel stock sheet boasts a thickness of 0.410 inches and precise dimensions of 14 inches by 14 inches. The inherent properties of 304 stainless steel, including its excellent resistance to oxidation and a wide range of corrosive media, make it ideal for pneumatic applications exposed to moisture, chemicals, or extreme environmental conditions. This sheet is suitable for fabrication of durable enclosures, manifolds, valve components, and other parts requiring long-term reliability and structural integrity within pneumatic circuits.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the sheet surface thoroughly to remove any contaminants. 2. Fabricate the sheet according to design specifications for the pneumatic component. 3. Integrate the fabricated part into the pneumatic system, ensuring proper sealing and connection.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a lower grade of stainless steel not suitable for the specific pneumatic environment. | Always specify 304 or higher grade stainless steel for pneumatic components exposed to corrosive elements or high humidity to ensure longevity and prevent premature failure. |
| Improper handling leading to scratches or damage that compromise the material's integrity. | Handle the sheet with care using clean gloves and appropriate lifting equipment to prevent surface damage and maintain the material's intended performance characteristics. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Pneumatic manifold fabrication, Enclosures for pneumatic control panels, Custom valve bodies and components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||