This heavy-gauge 304 stainless steel stock sheet offers exceptional strength and corrosion resistance, ideal for robust suspending and bracing applications in challenging industrial settings. Its premium material ensures long-term structural integrity.
| Standard | ASME B18 |
| Material | 304 Stainless Steel |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.376" |
| Length | 25" |
| Width | 15" |
Designed for demanding industrial environments, this 0.376" thick, 25" long, and 15" wide stock sheet is fabricated from premium 304 stainless steel. This austenitic alloy provides superior corrosion resistance, particularly against a wide range of chemicals and atmospheric conditions, preventing rust and degradation in humid or corrosive atmospheres. Its substantial thickness ensures high tensile strength and rigidity, making it suitable for load-bearing applications, structural support, and custom fabrication of bracing components in chemical processing plants, marine environments, and food processing facilities where hygiene and durability are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare mounting surfaces, ensuring they are clean, level, and structurally sound. 2. Precisely mark and drill mounting holes in the stainless steel sheet, accounting for intended load distribution. 3. Securely fasten the sheet using appropriate industrial-grade fasteners, ensuring adequate torque for stability.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | 75,000 psi (515 MPa) |
| Yield Strength | 30,000 psi (205 MPa) |
| Elongation in 2 in. | 40% min |
| Hardness | Rockwell B95 max |
| Carbon (C) | 0.08% max |
| Chromium (Cr) | 18.0 - 20.0% |
| Nickel (Ni) | 8.0 - 10.5% |
| Manganese (Mn) | 2.00% max |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Good |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that cannot support the intended load. | Consult load capacity charts and select fasteners with a shear and tensile strength that exceeds the calculated forces acting on the brace. |
| Inadequate surface preparation leading to premature corrosion at contact points. | Thoroughly clean both the stainless steel sheet and mounting surfaces to remove any contaminants, oils, or debris before installation. |
A: This 304 Stainless Steel Stock Sheet is manufactured from 304 Stainless Steel.
A: Structural bracing for heavy machinery, Support members in corrosive environments, Custom fabrication of industrial fixtures and supports.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||